Aktakom ASE-1112 사용 설명서 - 페이지 3

{카테고리_이름} Aktakom ASE-1112에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ASE-1112 6 페이지. Temperature controlled soldering station

Do not touch any other area but the handle when the soldering iron is working.

It is very hot!

Do not leave children alone in the presence of the soldering iron.

Soldering must be done on non-combustible surfaces. Make sure any material

in the vicinity can not be damaged by the heat.

When the device can no longer be operated safely, disconnect it immediately

and secure it against being operated unintentionally.

It can be assumed that safe operation is no longer possible if:

• the device exhibits visible damage;

• the device no longer works;

• it has been stored for a long lime under unfavorable conditions;

• the device was exposed to extraordinary stress caused by transport.

Operation

Unpack the soldering station and check all parts. Damaged parts may not be put

in to operation.

Put the holding rack for the soldering iron sideways in the soldering station,

wet the cleaning sponge in the sponge rack with water.

Put the soldering iron tin the holding rack.

Place the soldering station on a solid and dry surface.

Connect the mains plug to a socket and turn on the soldering station by using

the power switch (I=ON / 0=OFF). When turned on, the power switch is lit.