Aktakom ASE-4509 사용자 설명서 - 페이지 4

{카테고리_이름} Aktakom ASE-4509에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ASE-4509 8 페이지. Smd rework station

3. This item has sleep function. When you put the air

pump on the racket, the item will stop heating, And

the display shows"SLP"( means SLEEP) , when you pick

up the air pump , the Item will get back to the set

temperature.

2.3 How to use

• Before use, please check if the product voltage

conforms with the local voltage.

• Connect the mains plug to a socket.

• Assemble the nozzles into the position( try to use

nozzles with bigger diameter).

• Turn on the power switch, set the air flow rate and

temperature, and put the unit on the racket.

• Put the nozzle on the pins of the IC( do not touch

directly), so that the hot air can melt the Solder tin

on the IC pin, and then use the tweezers to

remove the IC.

After operation, turn off the power switch, then pull

out the power plug and put the unit in a safe place out

the reach of children.