AeroAudio MOS QUATRO IP 매뉴얼 - 페이지 7

{카테고리_이름} AeroAudio MOS QUATRO IP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AeroAudio MOS QUATRO IP 11 페이지.

MOS QUATRO IP

MANUAL

METHOD 2: TELOS AXIA X-NODE / LIVEWIRE DRIVER

Remote device settings: select "Axia X-node"

Remote IP: enter the IP address of the X-node/livewire

In this example 192.168.0.100 - Make sure that devices are in the same IP-range.

To activate and save the settings press "Save settings and reboot."

MIC 1 (same for MIC 2, MIC 3 and MIC 4)

GPIO: Select your GPIO contact and designated PIN

In this example "GPI1" and "PIN 1"

TCP ON and TCP OFF: not used in this method

To activate and save the settings press "Save settings and reboot."

After save settings and reboot, if the device is found it wil show "connected"

STEENWEG 148C - 9810 NAZARETH - BELGIUM - T +32 (0)9 396 76 40 - [email protected]

If not it will show "not connected"

Please check if your device is correct-

ley connected and the IP address is set

correct.