AeroAudio MOS QUATRO IP 매뉴얼 - 페이지 8

{카테고리_이름} AeroAudio MOS QUATRO IP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AeroAudio MOS QUATRO IP 11 페이지.

MOS QUATRO IP

MANUAL

METHOD 3: TELOS AXIA QOR/IQ/IQx

Remote device settings: select "Axia QOR/IQx"

Remote IP: enter the IP address of the QOR/IQx

In this example 192.168.0.1 - Make sure that devices are in the same IP-range.

To activate and save the settings press "Save settings and reboot."

MIC 1 (same for MIC 2, MIC 3 and MIC 4)

Channel Name: enter source name of your microphone like you use in the QOR/IQx source

profile. In this example "MIC1"

To activate and save the settings press "Save settings and reboot."

Make sure for the first use to reload the show profile of your studio console.

If for any reason the MOS Quatro IP doesn't react on the commands of the QOR/IQx (this can be

caused by power reboot of the QOR/IQx or too fast loading of the show profiles) then please try to

reload the show profile on the QOR/IQx.

STEENWEG 148C - 9810 NAZARETH - BELGIUM - T +32 (0)9 396 76 40 - [email protected]

If not it will show "not connected"

Please check if your device is correct-

ley connected and the IP address is set

correct.