American Sanders OBS-18 운영자 안전 지침 - 페이지 4

{카테고리_이름} American Sanders OBS-18에 대한 운영자 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. American Sanders OBS-18 7 페이지. Clarke oscillating sander
American Sanders OBS-18에 대해서도 마찬가지입니다: 운영자 지침 (2 페이지)

페이지 인쇄

ENGLISH

MACHINE SET-UP

This sanding machine is designed to be operated with a

remote vacuum dust collection system or with the included

dust bag.

Preparing Remote Vacuum Dust Collection Systems

To prepare the machine for remote vacuum dust collection

systems that have a 2" hose end, follow this procedure:

1. Install 2" hose end (figure 4, A) directly into the

exhaust tube (figure 4, B).

2. The exhaust tube can be rotated for optimum conve-

nience.

To prepare the machine for remote vacuum dust collection

systems that have a 1 ½" hose end, follow this procedure:

1. Install the 2" x 1½" hose end adaptor (Part No.

30563A) (figure 4, C) over the exhaust tube (figure 4,

B).

2. Insert 1 ½" hose end (figure 4, D) into the adaptor

(figure 4, C).

NOTE: Start the remote vacuum collection system

before operation.

Preparing to use the included dust bag

To prepare the machine for use with the included dust bag

(Part No. 53741A), follow this procedure:

1. Install the dust bag by pressing the end onto the

exhaust tube until the ring locks into the groove (figure

5). This is best done by pressing on the back of the

bag opening with the palm of your hand.

2. The exhaust tube can be rotated for optimum conve-

nience.

3. To remove the dust bag from the exhaust tube, pry up

the end of the bag opening to partially release the

internal rib from the groove, then pull.

4. To empty the dust bag, unzip the disposal flap and

force contents out by inverting the bag.

NOTE: For best results, empty frequently. Follow all

warnings posted in this manual and on the dust bag.

-6-

2" Hose from

vacuum system

(not included)

Exhaust Tube

Clarke

American Sanders

1.5" Hose from

vacuum system

(not included)

(30563A) 2" Tube x 1.5" hose adaptor

Figure 4

Install the dust bag by

pressing the end onto the

exhaust tube until the ring

locks into the groove.

Figure 5

Operator's Manual (EN) - OBS-18/18DC