Bob's Space Racers BSR-3000 보드 설정 - 페이지 7
{카테고리_이름} Bob's Space Racers BSR-3000에 대한 보드 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Bob's Space Racers BSR-3000 8 페이지.
페이지 인쇄Please Note: Read all the instructions before performing any procedures.
3.1 Factory Reset
The reason for a Factory Reset is if the Master is no longer functioning and you are needing to
turn a known working Unit board into a Master or change a Master board into a Unit board.
Take the Master or Unit board (Figure 3.1) and install the board into the board housing (Figure
3.1.1
3.2).
Secure the BSR-3000 board with the 3/8-inch Nylon Hex Standoff (Figure 3.4) from the old board.
3.1.2
Plug all the cables into the board
3.1.3
Bob's Space Racers® Inc. ©2017
G
AME POWER MUST BE ON TO PERFORM THIS OPERATION
Figure 3.1
Figure 3.3
except
Network
Cables
Power
Connector
Figure 3.2
the power connector. See Figure 3.5.
Figure 3.5
.
3/8-inch Nylon
Hex Standoff
Figure 3.4
Network
Cables
1. Each connector is keyed.
2. Connections may vary per game.
P a g e
| 7