Canon AE-1 설치 절차 매뉴얼 - 페이지 6

{카테고리_이름} Canon AE-1에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon AE-1 48 페이지.
Canon AE-1에 대해서도 마찬가지입니다: 시작하기 (2 페이지), 사용 설명서 (22 페이지), 매뉴얼 (42 페이지), 매뉴얼 (12 페이지), 사용 설명서 (22 페이지)

Canon AE-1 설치 절차 매뉴얼
I .2.2
Installing the Accessories
If you are installing accessories at the same time as you are installing this product, install the host machine first and
then the accessories in the following sequence:
1. Side paper deck (See its Installation Procedure.)
2. Installation of the buffer pass unit [I]
3. Finisher-AE 1 [2], Saddle Finisher-AE2 [3]
4. Puncher unit [4]
5. Connection to the host machine
a
Turning Off the Main Power of the Host Machine
When turning off the main power, be sure to go through the following in strict sequence to protect the machine's
hard disk:
[l] Hold on the power switch on the control panel 3 sec or more.
[2] Operate on the touch panel according to the shut-down sequence indicated so that the main power switch may
be turned off.
[3] Turn off the main power switch.
,
[4] Disconnect the power cable (for the power outlet).