Barnant Company PK15 운영 매뉴얼 - 페이지 11

{카테고리_이름} Barnant Company PK15에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Barnant Company PK15 13 페이지. Barnant/ponndorf hose pumps

Shim insertion/removal is achieved as follows:

1) Loosen the shoe with a flat wrench.

WARNING:

The casing cover must be in place, and hands must not be put into the pump casing, unless

the drive is stopped and the power is disconnected.

MAINTENANCE / REPAIR

When pumping materials that are likely to leave deposits, rinse the hose after use. When changing the hose, clean

any contamination from the pump casing.

If the pump is not going to be used for periods longer than five days, the hose must be removed to prevent permanent

deformation caused by continuous pressure from the rollers and hardening of the hose.

Contact the Manufacturer listed on the front of this manual to obtain information on replacement parts.

The pump model and serial number are embossed on the nameplate. Example pump model: "PK15." The "PK" indicates

that the pump is a PK Series pump. The "15" indicates that the pump uses tubing that has an inside diameter of 15 mm.

2) Insert/remove shim(s) and retighten

the shoe.

Barnant/Ponndorf