Air Change WM-ERV 설치 및 유지 관리 매뉴얼 - 페이지 8

{카테고리_이름} Air Change WM-ERV에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Change WM-ERV 12 페이지. Wall mount energy recovery ventilator

• Heat exchanger is secured in place by two screws that secure the heat

exchanger to the cabinet. This ensures that the heat exchanger can only be

removed from inside the room.

3.2.4 Filters

• Filters are supplied and fitted in the factory. A single filter is inserted and

removed via the return air inlet grid and provides filtering for both fresh air

inlet and return air inlet of the heat exchanger.

IMPORTANT: Never operate unit without filters fitted to the return

and fresh air intakes.

IMPORTANT: If these units are being used during construction when

adhesive, sealers, ducts, new and used carpets are being installed make

sure all equipment is fitted and adequately protected. We recommend

using disposable or temporary filters during commissioning and during

pre-hand over running.

• Internal controls are all 240V supply. Wiring is done in accordance to

Australian Standards and specific state electrical authorities.

• Single phase fan motors are internally protected and there is no need for

external overloads in the ventilation unit.

3.3

Pages.

WM-ERV Manual 2005.2.doc2