Akurat lighting SECTOR 매뉴얼 - 페이지 5
{카테고리_이름} Akurat lighting SECTOR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akurat lighting SECTOR 6 페이지.
페이지 인쇄SECTOR 8 Omni Grip
3.
This grip allows up to eight SECTOR LED modules to be connected at a 45° angle to form an omnidirectional panel. Adjusting the light of each LED module separately allows you to differentiate the light in
different directions.
The SECTOR LED modules are fixed by means of movable locks (1) which are locked by means of knobs. To electrically connect the modules to the SECTOR controller, special Sector Ribbon Cables long are
required, which are numbered for easy identification of individual sectors. The cables are sold in sets of 4, numbered from 1 to 4 or 5 to 8.
The cable should be connected before placing the SECTOR LED module on the mounting pins of the grip. Securing knobs lock the cables against accidental disconnection.
SECTOR 8 OmniGrip is equipped with a holder (2) for attaching a 60cm paper lantern (3), which is a good diffuser for LED modules, but which can also make such an omnidirectional panel visible in the frame
as a glowing element of the scenery.
Photo 3
SECTOR Ribbon Cables long
1
1
1
1
Photo 4
SECTOR 8 Omni Grip
3
1
1
1
2
1
S E C T O R