Akurat lighting SECTOR 매뉴얼 - 페이지 6

{카테고리_이름} Akurat lighting SECTOR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akurat lighting SECTOR 6 페이지.

SECTOR V-Lock Power Plate

for SECTOR Controller

The plate allows the SECTOR controller to be powered from a V-Lock battery. To do this, connect the cable (1) to the SECTOR power supply socket and plug a charged battery into the V-Lock socket.

Due to the signiﬁcant power, we do not recommend using low capacity batteries.

Inside the PCB, there is a slightly warm electronic system which raises the voltage, so it is necessary to ensure free air ﬂow through the ventilation slots (2) in the plate body.

The board is equipped with Velcro fastenings (3) which allow to install it to SECTOR 4 Panel Grip in place of the power supply. To secure the plate with Velcro strip, unscrew the V-Lock socket ﬁxing screws (4),

insert and fasten the Velcro strips underneath the socket and then tighten the socket again.

Photo 5

SECTOR V-Lock Power Plate

S E C T O R

All components of SECTOR system have been designed and are manufactured in Poland by:

Akurat Lighting Sp. z o.o. • ul. Akurat 6, 02-488 Warszawa, Poland • KRS 0000449843 • VAT PL6342815487 (production and service: ul. Krakusa 11, 05-802 Pruszkow, Poland)

tel. +48228636433 • [email protected] • www.akurat.lighting