Domus SPR418 설치 및 운영 지침 매뉴얼 - 페이지 7

{카테고리_이름} Domus SPR418에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Domus SPR418 16 페이지.

1.5

Automatic humidity controlled boost activation/inactivation (for adjustment see 5.12)

From the home screen, press and hold "SET" and "COPY" simultaneously for 3 seconds

Press "COPY" as required to move to 'Menu 7' 'IhuN'

Use the "+" or "-" button to set to 'on' or 'off' (OF) as required

Press "SET" to record or "ESC" to discard the settings and return to the home screen

1.6

Filter reminder adjustment/inactivation

From the home screen, press and hold "SET" and "COPY" simultaneously for 3 seconds

Press "COPY" as required to move to 'Menu 1' 'Filter'

Use the "+" or "-" buttons to change the time delay in steps of 50 hours as required or 'off'.

Note: The filter check reminder is factory set at the maximum of 3000 hours (approx.

4months - recommended). During adjustment, when this maximum has been reached, the

'off' option can be accessed.

Press "SET" to record or "ESC" to discard the settings and return to the home screen

1.7

Frost protection trigger temperature adjustment

From the home screen, press and hold "SET" and "COPY" simultaneously for 3 seconds

Press "COPY" as required to move to 'Menu 4' 'T5'

Menu T5 sets the frost protection trigger temperature between -15°C and +5°C (Factory

default +1°C)

Use the "+" or "-" buttons to set the trigger temperature in steps of 1°C

LAB1306R, Issue 1, March 2018

V E N T I L A T I O N

Page 20

Page 7