DOMUSA TEKNIK Silo 설치 및 운영 지침 매뉴얼 - 페이지 14

{카테고리_이름} DOMUSA TEKNIK Silo에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOMUSA TEKNIK Silo 20 페이지.

Silo

7 SILO FILLING INSTRUCTIONS

The DOMUSA TEKNIK Silo is designed to be filled by a tank truck, through a flexible hose that pumps

the pellets into the Silo. Tank trucks for pellet supply usually have a flexible hose of up to 30 metres,

and the Silo should therefore be installed at a maximum distance of 30 metres from the nearest truck

access point (if a longer distance is required, check with the pellet supplier whether longer hoses are

available). The truck access area must also have a minimum width of B = 3 m and a minimum

clearance of H = 4 m.

The filling nozzle must be accessible from outside the building, and so the premises in which the Silo is

installed must have at least one exterior wall. If this is not possible, the filling hose must be run to the

outside.

Ventilation duct

Boiler room

Filling nozzle

Silo

B=3 m

máx. 30 m

IMPORTANT: For safe Silo filling it is essential for the filling nozzle and supply hose to be earthed

during the filling process.