Air Cleaning Equipment Horizon Titan XG90 설치 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} Air Cleaning Equipment Horizon Titan XG90에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Cleaning Equipment Horizon Titan XG90 13 페이지.

2.1. Power Key

• Use this button to turn the dehumidiﬁer on and oﬀ. Press once to turn machine on.

•

You will hear beep and the

ond time and you will hear one beep as the machine shuts down. Note that there is

a one minute fan delay on shutdown.

3.2. Arrow Buttons

• Use the up and down arrow buttons to set the desired humidity setpoint on the dis-

play screen.

point means that when the indoor humidity is lower than the set point, the machine

will stop automatically. Conversely, when the indoor humidity is higher than the set

level, the unit will operate.

4.3. Continuous Mode

•

Continuous Mode can be used when you want your dehumidiﬁer to run constantly

for testing purposes, To switch into continuous mode, press either the up or down ar-

row. Once you hear a beep, press both arrow buttons simultaneously. At this point

the

light should illuminate green on the display board to indicate you have success-

fully switched to continuous mode.

• When set to continuous, the dehumidiﬁer will run constantly, regardless of the hu-

midity level until you turn the unit oﬀ or switch back to normal humidistat operation. If

you would like to switch back to normal humidistat operation, simply press the up

and down arrows simultaneously.

Key Functions

light will illuminate red. Press the power button a sec-

The setpoint can be any number between 35-99%. Creating a set-