Da-Lite IDEA Screen 지침서 - 페이지 7

{카테고리_이름} Da-Lite IDEA Screen에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite IDEA Screen 12 페이지. For epson brightlink displays (16:9)
Da-Lite IDEA Screen에 대해서도 마찬가지입니다: 지침서 (8 페이지), 지침 (2 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

Assembly Instructions for Multi-Panel Screens

Carefully unpack unit and place all panels on top of the clean

work area. The viewing surface of each panel must face down.

2. Slide each panel together, aligning the both the top and bottom

frames (Figure 3).

3. Find (1) seam brace and remove the release liner from both strips

of adhesive tape.

4. Ensuring that the panels are still in alignment, line up the seam

brace with one of the panel seams with adhesive side facing

down. Do not press adhesive into panels yet. Maintain at least a

small gap between the adhesive and the panel.

Figure 3

10-32 Nuts

Seam Braces

Figure 4

5. Use ⅜" open wrench or socket driver and (4) 10-32 nuts to attach

seam brace onto the studs on the top and bottom of screen

frame at the panel seam. Tighten all four nuts once attached to

the frame (Figure 4).

NOTE: For optimal seam alignment, hold the panels together

tightly while the seam brace is being adhered and the lock nuts

are being tightened.

6. Press adhesive into panels. Apply steady pressure along the

length of the seam brace to attach firmly.

7. For three panel screens, repeat Steps 3-6 to attach the second

seam brace.