Da-Lite ADVANTAGE DELUXE ELECTROL 지침서 - 페이지 4

{카테고리_이름} Da-Lite ADVANTAGE DELUXE ELECTROL에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite ADVANTAGE DELUXE ELECTROL 12 페이지. Automatic electric projection screen
Da-Lite ADVANTAGE DELUXE ELECTROL에 대해서도 마찬가지입니다: 사양 (2 페이지), 지침서 (12 페이지), 사양 데이터 (2 페이지), 지침서 (12 페이지), 지침서 (9 페이지), 지침서 (8 페이지)

페이지 인쇄
Da-Lite ADVANTAGE DELUXE ELECTROL 지침서

Screen Adjustment

NOTE: Use a screw driver or 5/32" Allen wrench to make adjustments.
More Screen Drop
1. Place operating switch in "down" position.
2. When the screen stops, turn the white "down" limit knob (Fig.
2) one-quarter turn counterclockwise. Test by raising picture
surface approximately two feet, then lower again. Repeat until
desired picture surface position is attained.
CAUTION: Do not adjust for more drop than what was
ordered. At least 1-1/2 wraps of fabric must remain on the
roller. This screen comes standard with 0" or 2" black at
the top. See the specification data sheet for details.
ATTENTION! N'effectuez pas de réglage pour obtenir un
déroulement supérieur à celui commandé. Au moins 1 à 1/2
tour de toile doit être maintenu sur le cylindre. Cet écran est
doté de série d'une bande noire supérieure de 0 cm (0 po) ou
5 cm (2 po). Consultez la fiche technique pour plus de
renseignements.
4
Less Screen Drop
1. Raise picture surface approximately two feet above
desired level.
2. Place operating switch in "off"position.
3. Turn the white "down" limit switch (Fig. 2) one-quarter turn
clockwise. Test by raising picture surface approximately two
feet, then lower again. Repeat until desired picture surface
position is attained.
Contact Da-Lite at 800-622-3737 if door motor needs
adjustment.