Da-Lite IDEA Panoramic 지침서 - 페이지 4

{카테고리_이름} Da-Lite IDEA Panoramic에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite IDEA Panoramic 8 페이지.
Da-Lite IDEA Panoramic에 대해서도 마찬가지입니다: 지침서 (12 페이지), 지침서 (12 페이지)

페이지 인쇄

Assembly (continued)

6. Center middle aluminum tray with the top of the vertically

upright middle panel and attach with (5) #8 x 1/2" screws. Insert

screws through the tray into the groove of the frame (Figure 2a).

Note: The length of the middle tray is the same as the length of

the middle panel.

7. Align each side tray with the middle tray and attach to the top of

the vertically upright frame with (5) #8 x 1/2" screws per tray. Insert

screws through the tray into the groove of the frame. Screws

should only be inserted halfway at this time, keeping the tray

loose.

8. Join the tray sections by attaching a connecting plate between

the middle tray and each side tray. Align the tray sections

and secure with (2) 10–32 nuts. Tighten both

nuts into each plate (Figure 2b).

Side Aluminum Tray

Groove of Frame

Viewing Surface

9. Tighten the screws for each tray into the bottom of the frame

10. Place screen assembly back down on the clean work area,

Middle Aluminum Tray

#8 x 1/2" Screws

Middle Panel

Figure 2a

Note: Straight and even alignment of the tray sections will

maintain rigidity of the screen assembly when installed on

the wall.

(Figure 2a).

viewing surface up..

Side Aluminum Tray

10-32 Nuts

Tray Connecting Plate

Figure 2b