American Standard 1748 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} American Standard 1748에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard 1748 10 페이지. Aths with integral apron
American Standard 1748에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 및 운영 지침 매뉴얼 (16 페이지)

페이지 인쇄

Operation:

SYSTEM II WHIRLPOOL

BATHING:

• Fill bath with water at a comfortable bathing temperature - If your whirlpool is equipped with the

optional EZ-Heater, it will automatically maintain the water temperature.

• IMPORTANT: Do NOT fill the whirlpool more than 2/3 full before getting in, as it may overflow.

• IMPORTANT: Do NOT add bath oils or salts – this will damage the whirlpool pump.

• IMPORTANT: Water level must be at least one inch (25mm) above the highest jet before the whirlpool is started

Operating the system without water (dry running) for extended periods will cause pump damage and void the warranty.

OPERATING WHIRLPOOL:

AIR VOLUME CONTROL ADJUSTMENTS:

with the water. Rotate the air volume control counterclockwise for more turbulence, and clockwise for less.

FLOW JET VOLUME ADJUSTMENTS:

the nozzle counterclockwise for vigorous and clockwise for soft.

Pump Speed

Change

WHIRLPOOL CONTROL:

Press this button to turn pump on or off.

SPEED:

Press this button to alternate between high and low pump speed.

PULSE FUNCTION:

Press this button to start the pulse function.

Pump speed will continuously vary between high and low.

Press again to exit pulse function.

Water flow-levels can be adjusted from vigorous to soft by rotating

Whirpool

On/Off

Pump Pulse

Function

Water turbulence is determined by the amount of air mixed

751733-100 Rev. H