American Standard 2651.110 설치 지침 및 사용 설명서 - 페이지 10
{카테고리_이름} American Standard 2651.110에 대한 설치 지침 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard 2651.110 15 페이지. Walk-in bath
페이지 인쇄
Faucet and Pump
Access Panels
IMPORTANT
Do not use tile flange to
screw or nail tub in place.
Integral Flange
Model
2651.110
2848.100
3051.110
3260.210
Tubs installed in an alcove installation require a raised flange to prevent water from seeping past the tub and into
the wall. Tubs without a raised flange shall be installed with a tile flange kit model TFK-60. The flange kit is a
long plastic strip that is fits onto the rim of the tub to provide the leak protection needed.
The tile flange should be installed on the tub before it is placed in the alcove. Install the tile flange along all sides
of the tub where the wall will be. Measure to fit and miter cut the flange corners. The flange should be attached to
the tub with a construction adhesive. Once the tub is in place to be installed and flange kit mounted, fasten the
flange to studs using galvanized fasteners
Warning: Never attempt to nail or screw thru the tub as this will result in product failure and will void the
warranty.
Alcove Installation
`
A
B
C
50.5"
26 ¼"
37 ½"
48"
28"
38"
50.5"
30 ½"
37 ½"
59 ½"
32
37
9
Non Integral Flange
D
E
F
9 ½"
11 ½"
15 ½"
10 ¾"
14"
16 ¾"
9 ½"
14½"
15 ½"
11 ½"
16"
20½"
OWNERS MANUAL
G
N/A
N/A
N/A
N/A