Canon Color imageCLASS MF8180c 빠른 시작 매뉴얼 - 페이지 18
{카테고리_이름} Canon Color imageCLASS MF8180c에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8180c 25 페이지. Color laser copier - printer - scanner - fax - network capabilities
Canon Color imageCLASS MF8180c에 대해서도 마찬가지입니다: 원격 UI 매뉴얼 (40 페이지), 네트워크 매뉴얼 (49 페이지), 시작 설명서 (35 페이지)
페이지 인쇄
Specify an IP address manually (static allocation):
NOTE
You will need an unused IP Address that falls within the scheme of your network. You will also need to know the
subnet mask and the gateway address. For definitions of each please see the Network Guide. If you are not sure what
these numbers are and you have a network administrator or consultant you may need to contact them to get the
numbers.
1 Press [Menu] ➝
or
➝ press [Set].
(arrow keys) to select <1.LAN SETTINGS> ➝ press [Set].
2 Press
or
(arrow keys) to select <1.IP ADDRESS AUTO.> ➝ press [Set].
3 Press
or
(arrow keys) to select <OFF> ➝ press [Set].
4 Press
or
(arrow keys) to select <2.IP ADDRESS> ➝ press [Set].
5 Press
or
6 Enter an IP address of the machine using the numeric keys ➝ press [Set].
Numbers move right to left in each section when entered. To enter a 10 you would
enter 010.
Write down the IP address you entered: _______ . _______ . _______ . _______
(arrow keys) to select <3.SUBNET MASK> ➝ press [Set].
7 Press
or
8 Enter the subnet mask using the numeric keys ➝ press [Set].
Numbers move right to left in each section when entered. To enter a 10 you would
enter 010.
Write down the subnet mask you entered: _______ . _______ . _______ . _______
(arrow keys) to select <4.DEFAULT GATEWAY> ➝ press [Set].
9 Press
or
10 Enter the default gateway address using the numeric keys ➝ press [Set].
Write down the gateway address you entered: _______ . _______ . _______ . _______
11 Press [Stop/Reset] to return to the standby display.
12 Turn the machine off by disconnecting the power cord. Connect the network cable
as described in step
back in.
(arrow keys) to select <6.NETWORK SETTINGS> on the LCD
. Turn the machine back on by plugging the power cord
- 18 -