Canon Color imageCLASS MF8180c 빠른 시작 매뉴얼 - 페이지 17
{카테고리_이름} Canon Color imageCLASS MF8180c에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8180c 25 페이지. Color laser copier - printer - scanner - fax - network capabilities
Canon Color imageCLASS MF8180c에 대해서도 마찬가지입니다: 원격 UI 매뉴얼 (40 페이지), 네트워크 매뉴얼 (49 페이지), 시작 설명서 (35 페이지)
페이지 인쇄
Specifying Automatic Network Settings (dynamic allocation):
NOTE
This machine is set by default to automatically draw an IP using DHCP. If your
●
network server or router is configured to provide a DHCP address all you need to
do is connect a network cable and power on the printer. The printer will draw an
IP address automatically.
This machine also supports automatic IP addresses using BOOTP and RARP
●
protocols. For definitions and an explanation of each please refer to the Network
Guide. Use the following instructions to change the protocol to BOOTP or RARP if
necessary.
If you are using Static IP addresses on your network proceed to
●
1 Press [Menu] ➝
or
➝ press [Set].
(arrow keys) to select <1.LAN SETTINGS> ➝ press [Set].
2 Press
or
(arrow keys) to select <1.IP ADDRESS AUTO.> ➝ press [Set].
3 Press
or
(arrow keys) to select <ON> ➝ press [Set].
4 Press
or
(arrow keys) to select <1.DHCP>, <2.BOOTP>, or <3.RARP> ➝ press
5 Press
or
[Set].
NOTE
For information on each protocol, see the glossary in Chapter 3,"Appendix," in the Network Guide.
●
(arrow keys) to select <ON> ➝ press [Set].
6 Press
or
7 Press [Stop/Reset] to return to the standby display.
8 Turn the machine off by disconnecting the power cord. Connect the network cable as
described in step
. Turn the machine back on by plugging the power cord back in.
Proceed to step
.
(arrow keys) to select <6.NETWORK SETTINGS> on the LCD
- 17 -
Set key
Menu
Menu
Menu key
Arrow keys
Set
Set
Stop/Reset
Stop/Reset
Stop/Reset key