Canon Color imageCLASS MF8180c Посібник із швидкого старту - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Принтер "Все в одному Canon Color imageCLASS MF8180c. Canon Color imageCLASS MF8180c 25 сторінок. Color laser copier - printer - scanner - fax - network capabilities
Також для Canon Color imageCLASS MF8180c: Посібник з дистанційного керування (40 сторінок), Посібник з експлуатації мережі (49 сторінок), Початковий посібник (35 сторінок)

Specifying Automatic Network Settings (dynamic allocation):

NOTE

This machine is set by default to automatically draw an IP using DHCP. If your

●

network server or router is configured to provide a DHCP address all you need to

do is connect a network cable and power on the printer. The printer will draw an

IP address automatically.

This machine also supports automatic IP addresses using BOOTP and RARP

●

protocols. For definitions and an explanation of each please refer to the Network

Guide. Use the following instructions to change the protocol to BOOTP or RARP if

necessary.

If you are using Static IP addresses on your network proceed to

●

1 Press [Menu] ➝

➝ press [Set].

(arrow keys) to select <1.LAN SETTINGS> ➝ press [Set].

2 Press

(arrow keys) to select <1.IP ADDRESS AUTO.> ➝ press [Set].

3 Press

(arrow keys) to select <ON> ➝ press [Set].

4 Press

(arrow keys) to select <1.DHCP>, <2.BOOTP>, or <3.RARP> ➝ press

5 Press

[Set].

NOTE

For information on each protocol, see the glossary in Chapter 3,"Appendix," in the Network Guide.

●

(arrow keys) to select <ON> ➝ press [Set].

6 Press

7 Press [Stop/Reset] to return to the standby display.

8 Turn the machine off by disconnecting the power cord. Connect the network cable as

described in step

. Turn the machine back on by plugging the power cord back in.

Proceed to step

(arrow keys) to select <6.NETWORK SETTINGS> on the LCD

- 17 -

Set key

Menu key

Arrow keys

Set

Stop/Reset

Stop/Reset key