Canon Color imageCLASS MF8280Cw 설정 매뉴얼 - 페이지 5
{카테고리_이름} Canon Color imageCLASS MF8280Cw에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8280Cw 25 페이지. Wireless lan
Canon Color imageCLASS MF8280Cw에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (37 페이지), 빠른 매뉴얼 (4 페이지), 설정 매뉴얼 (20 페이지), 시작하기 (36 페이지)
![Canon Color imageCLASS MF8280Cw 설정 매뉴얼](/uploads/products/server2/1123852/1123852.jpg)
•
You should press the WPS button within 2
minutes after you select <Yes> in step
•
Press and
hold*
the button until the WPS lamp
lights or blinks.
*
The time that you should hold the button may vary
depending on the wireless router you are using.
Move to the machine
8
•
After the <Connected.> screen is displayed,
wait until the Wi-Fi indicator stops blinking and
turns on.
Wait approximately 2 minutes
after the connection is completed.
The IP address is set during this time period.
Proceed to P. 9
1
Prepare for Wireless LAN Connection
When an error message appears:
Press [OK] to close the screen, check whether
or not the WPS function of the wireless router is
correctly set, and then retry the settings.
If the access point cannot be detected even after
retrying, see the following.
.
6
When checking the network connection:
You can check if the machine is properly connected
to the network using a computer that is connected
to the same network.
When setting an IP address manually:
2
Setting the Wireless LAN
Setting the Wireless LAN
"When an Error Message Appears" (P.14)
"Checking that the Wireless LAN Setting is
Completed" (P.9)
"Setting IP Addresses" in the e-Manual
3
4
Installing the Software
5
Troubleshooting