Canon Color imageCLASS MF8280Cw Посібник з налаштування - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з налаштування для Принтер "Все в одному Canon Color imageCLASS MF8280Cw. Canon Color imageCLASS MF8280Cw 25 сторінок. Wireless lan
Також для Canon Color imageCLASS MF8280Cw: Посібник для початківців (37 сторінок), Короткий посібник (4 сторінок), Посібник з налаштування (20 сторінок), Початок роботи (36 сторінок)



•

You should press the WPS button within 2

minutes after you select <Yes> in step

•

Press and

hold*

the button until the WPS lamp

lights or blinks.

The time that you should hold the button may vary

depending on the wireless router you are using.

Move to the machine

•

After the <Connected.> screen is displayed,

wait until the Wi-Fi indicator stops blinking and

turns on.

Wait approximately 2 minutes

after the connection is completed.

The IP address is set during this time period.

Proceed to P. 9

Prepare for Wireless LAN Connection

When an error message appears:

Press [OK] to close the screen, check whether

or not the WPS function of the wireless router is

correctly set, and then retry the settings.

If the access point cannot be detected even after

retrying, see the following.

When checking the network connection:

You can check if the machine is properly connected

to the network using a computer that is connected

to the same network.

When setting an IP address manually:

Setting the Wireless LAN

"When an Error Message Appears" (P.14)

"Checking that the Wireless LAN Setting is

Completed" (P.9)

"Setting IP Addresses" in the e-Manual

Installing the Software

Troubleshooting