Canon Color imageCLASS MF8350Cdn 시작 설명서 - 페이지 14
{카테고리_이름} Canon Color imageCLASS MF8350Cdn에 대한 시작 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8350Cdn 33 페이지. Canon imageclass mf8350cdn: quick start
Canon Color imageCLASS MF8350Cdn에 대해서도 마찬가지입니다: 시작 설명서 (29 페이지), 시작 설명서 (28 페이지)
페이지 인쇄
2.
S et the fax receive mode.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, the machine will be set to one of the following four operation
modes.
<Auto><Fax/Tel><Answer><Manual>
Do you want to use
this machine for fax
only (no telephone)?
<Yes>
<No>
No
Do you want to auto-
receive faxes and
answer phone manually?
<Yes>
<No>
No
Do you want to use
an answering machine
to answer the phone?
<Yes>
<No>
No
<Manual> mode is set.
→ Proceed to Step 3.
•
Responds to both a telephone call and fax with
handset pickup.
•
Rings when receiving a call or fax.
12
•
Receives a fax automatically.
•
Does not use the telephone.*
Yes
*
If connecting with the telephone in auto receive mode, the telephone
rings when receiving a fax or telephone call. You can answer the
telephone while the telephone is ringing. To configure so that the
telephone does not ring, see "Incoming Ring" in the
•
Receives a fax automatically.*
Yes
•
Responds to a telephone call by picking up the
handset.
*
An incoming call rings. To configure so that the incoming call does not
ring, see "Incoming Ring" in the
Yes
•
Receives a fax automatically.
•
Responds to a telephone call with the built-in answering
machine.
•
Rings when receiving a call or fax.
<Auto> mode is set.
→ Proceed to Step 3.
<Fax/Tel> mode is set.
→ Proceed to Step 3.
e-Manual.
<Answer> mode is set.
→ Proceed to Step 3.
e-Manual.