Dongguan Xin Bao Instrument SBT401 운영 매뉴얼 - 페이지 10
{카테고리_이름} Dongguan Xin Bao Instrument SBT401에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dongguan Xin Bao Instrument SBT401 16 페이지. Abrasion and pilling tester
페이지 인쇄Dongguan Xin Bao Instrument Co., Ltd
2.
Set the number of cycles required by using the set keys on the main counter in the centre of the
machine. Press the green button while pressing the arrow keys to do this.
3.
Ensure that the batch total counter above the main counter also reads zero, if it does not then
press the RESET button to the right hand side of the display.
4.
The machine is now ready to commence testing.
5.
When you need to stop individual counters e.g when the end point has been reached but there
are still other samples to abrade, the following instructions should be followed :
6.
Press the number of the counter which you wish to stop .
7.
Press the orange button to stop this counter, when you press the green button to start, the rest
of the counters will begin but this counter which you have chosen will hold the number which
was stopped at.
Add: The 3rd Industrial Zone, Chashan Town, Dongguan. Tel: 0769-33365786 www.ots-testequipment.net
8