Donner PATH SEEKER 소유자 매뉴얼 - 페이지 2

{카테고리_이름} Donner PATH SEEKER에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Donner PATH SEEKER 2 페이지.

●Easy Controls

The Path Seeker features an easy-to-use interface: Each output channel has an independent volume control for detailed signal mixing,

and LEDs under knobs indicate output channel working status.

●2 Working Modes

This unit features two modes: A or B mode and A and B mode. You can select an output channel in A or B mode by tapping left

footswitch, or select both in A and B mode by tapping right footswitch.

●Phase Correction

When you split your signal to two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the

phase will help. In this case, you can use the toggle to invert the phase of channel B by 180° when necessary.

●Carefully Selected Components

The Path Seeker is designed and built with carefully selected components to ensure best sound quality and road performance. The

solid Aluminum-alloy chassis ensures touring reliability.

Features

●Convenient compact size

●Buffer bypass

●Two output channels with independent volume control

●Polarity reverse toggle (OUT B) for output signal phase correction

●LED indicator shows working state

●Flexible design for a variety of scenarios

path

SEEKER

Overview

Speciﬁcations

Power Requirement: 9V DC center negative

Current Consumption: 5mA

Dimensions: 132x64x45mm

Weight: 23 g

Material: Aluminum alloy

Connection & Controls

OUT a

VOL a

IN Jack: 1/4" mono audio jack, for connecting instruments or other pedals.

9V DC Jack: For power supply, use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and

negative in the center).

OUT A/B Jacks: 1/4" mono audio jacks, for connecting amps or other devices.

VOL A Knob: Controls the output volume of channel A (OUT A).

VOL B Knob: Controls the output volume of channel B (OUT B).

Footswitches: Use the footswitches to select an output channel or engage both output channels.

This unit features two modes: A or B mode and A and B mode.

In A or B mode, either LED will lit up to indicate current working channel; in A and B mode, all LEDs will lit up to indicate that all

output channels are working.

A OR B Footswitch: In A or B mode, tap the footswitch to toggle between A/B output channels.

A AND B Footswitch: Tap the footswitch to engage/disengage A and B mode.

0°-180° Toggle: Switch to 180° to invert the phase of channel B by 180° when necessary. When you split your signal to feed two

amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. Switching to

0° to keep the signal neutral.

OUT B

vol b

9V DC

180

path

SEEKER

and