Donner PATH SEEKER Manual do Proprietário - Página 2
Procurar online ou descarregar pdf Manual do Proprietário para Pedal de música Donner PATH SEEKER. Donner PATH SEEKER 2 páginas.
Imprimir página
●Easy Controls
The Path Seeker features an easy-to-use interface: Each output channel has an independent volume control for detailed signal mixing,
and LEDs under knobs indicate output channel working status.
●2 Working Modes
This unit features two modes: A or B mode and A and B mode. You can select an output channel in A or B mode by tapping left
footswitch, or select both in A and B mode by tapping right footswitch.
●Phase Correction
When you split your signal to two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the
phase will help. In this case, you can use the toggle to invert the phase of channel B by 180° when necessary.
●Carefully Selected Components
The Path Seeker is designed and built with carefully selected components to ensure best sound quality and road performance. The
solid Aluminum-alloy chassis ensures touring reliability.
Features
●Convenient compact size
●Buffer bypass
●Two output channels with independent volume control
●Polarity reverse toggle (OUT B) for output signal phase correction
●LED indicator shows working state
●Flexible design for a variety of scenarios
path
SEEKER
Overview
Specifications
Power Requirement: 9V DC center negative
Current Consumption: 5mA
Dimensions: 132x64x45mm
Weight: 23 g
5
Material: Aluminum alloy
Connection & Controls
c
OUT a
VOL a
d
A
B
OR
f
a
IN Jack: 1/4" mono audio jack, for connecting instruments or other pedals.
9V DC Jack: For power supply, use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and
b
negative in the center).
OUT A/B Jacks: 1/4" mono audio jacks, for connecting amps or other devices.
c
d
VOL A Knob: Controls the output volume of channel A (OUT A).
e
VOL B Knob: Controls the output volume of channel B (OUT B).
Footswitches: Use the footswitches to select an output channel or engage both output channels.
This unit features two modes: A or B mode and A and B mode.
In A or B mode, either LED will lit up to indicate current working channel; in A and B mode, all LEDs will lit up to indicate that all
output channels are working.
f
A OR B Footswitch: In A or B mode, tap the footswitch to toggle between A/B output channels.
A AND B Footswitch: Tap the footswitch to engage/disengage A and B mode.
g
0°-180° Toggle: Switch to 180° to invert the phase of channel B by 180° when necessary. When you split your signal to feed two
h
amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. Switching to
0° to keep the signal neutral.
c
a
b
OUT B
vol b
9V DC
IN
180
path
h
e
0
SEEKER
A
b
g
and