AMERICANA OZARK 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} AMERICANA OZARK에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMERICANA OZARK 7 페이지. Door canopy

STEP 3.

-Use a ladder with any type of shim to support the front of the roof panels while the rear half is attached

to the wall channel (see Fig 3-1).

-Do not secure front half of roof panels to gutter until all roof panels are attached to wall channel.

-Working from underneath, attach roof panels to the wall channel with #8 - 32 x 1/2" bolt with nut and washer

(see Fig. 3-2).

-After rook panel is secure, apply silicone to four faces of the styrofoam flashing plug and fit it between the mounting

channel and roof panel (see Fig. 3-2).

Fig. 3-1

-Once roof panels are secured to wall channel, move the gutter to the front of roof panels.

-Square the entire unit and tighten all screws.

-Connect roof panels to the gutter using 2 - #8 x 3/4" Tek screws per panel as shown (see Fig. 3-4).

-Square cover again and tighten all screws.

Move Gutter to

Front of Panels

Fig. 3-3

Flashing Plug

#8 - 32 x 1/2" Bolt

w/ Nut & Washer

Ladder w/ Shim

Fig. 3-2

Fig. 3-4

Awning Rail / Mounting

Channel Assembly

Styrofoam

Roof Panel

#8 x 3/4" Tek Screw

Roof Panel

Gutter