Doodle Labs Smart Radio 문제 해결 매뉴얼
{카테고리_이름} Doodle Labs Smart Radio에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doodle Labs Smart Radio 16 페이지. Advanced mimo mesh router for resilient private wireless networks
페이지 인쇄Smart Radio Trouble-Shooting
Guide
Smart Radio Trouble-Shooting Guide
Advanced MIMO Mesh Router for Resilient Private Wireless Networks
Introduction
This is a trouble-shooting guide for all Smart Radio models. The Smart Radio runs Doodle Labs
Mesh Rider® OS, a customized version of Openwrt. This guide is organized in the following
sections
•
System Overview
•
Trouble-shooting radio access
•
Trouble-shooting link quality
•
UART and USB ports
•
Crashes, reboots and others
•
Factory Resetting
•
Connect with Technical Support
•
References
We recommend reading the System Overview section before jumping to any specific section of
the guide.
System Overview
Fig. 1 shows the default network configuration of the Smart Radio. The radios are pre-
configured so that the entire Mesh Rider network acts like one big distributed Ethernet switch.
Therefore, devices plugged into Mesh Rider will automatically be able to communicate with one
another if they are on the same subnet. Accessing the radios themselves requires them to be
on the same subnet as the host machine.
© 2021 Doodle Labs. All rights reserved.
Page 1
September 8, 2021