Acer XB270HU 사용자 설명서 - 페이지 20
{카테고리_이름} Acer XB270HU에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer XB270HU 29 페이지.
페이지 인쇄
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
a
Make sure both the monitor and computer are switched off.
b
Connect the digital cable (only for DP models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 20-pin DP cable to the back of the
monitor and the other end to the computer's port.
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3
Connect the
USB Cable(Optional)
Connect the
USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
5
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
USB3.0 port
-supporting
fast charge
USB3.0 port
USB
9