Acer XB270HU Kullanıcı Kılavuzu - Sayfa 20
Monitör Acer XB270HU için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer XB270HU 29 sayfaları.
Sayfayı Yazdır
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
a
Make sure both the monitor and computer are switched off.
b
Connect the digital cable (only for DP models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 20-pin DP cable to the back of the
monitor and the other end to the computer's port.
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3
Connect the
USB Cable(Optional)
Connect the
USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
5
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
USB3.0 port
-supporting
fast charge
USB3.0 port
USB
9