DoorBird D1101V 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} DoorBird D1101V에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorBird D1101V 7 페이지. Doorstation driver

2. Go to Settings -> Administration and sign into the DoorBird as admin user (0000)

3. Create user 0002 (example: gxyddsa0002)

4. Enable all permissions for this user

5. Press Save

6. Enable SDDP from DoorBird app

1. Add Control4 Agents to project:

History Agent (required)

Communication Agent (required for Intercom)

Push Notification Agent (if using Push Notifications)

Announcement Agent (if setting announcements)

2. Connect DoorBird to Control4 via:

SDDP: If the SDDP setting in DoorBird is enabled, the DoorBird should be discoverable

in your project under the Items -> Discovered. Double click the DoorBird to add to the

project.

Other: Add driver to project, go to the Connections tab, select the Network tab in the

Connections section, and either drag the SDDP under Available Devices to the DoorBird

driver or enter the IP address after selecting the driver.

3. Once connected, enter username and password for user 0002 into the driver

4. Refresh navigators and test

5. If intercom with touchscreens is needed, dealers may need to press the doorbell button

once to sync the Control4 sip server with the DoorBird. Monitor driver logs by setting

property Debug Mode to 'On' and view them on the lua tab

Your driver setup is now complete! You may now continue to customizing all of the features of

the driver.

Control4 Proxies:

The DoorBird Doorstation is a great intercom and door entry system. Camera, Intercom, and

UI are available for Control4 projects:

Camera Proxy:

The driver will automatically setup the camera settings during setup. Local and Remote

viewing supported via Control4 T3 touchscreens, Control4 GUI, and MyHome App.

Intercom Proxy:

DoorBird units integrate with the intercom proxy via SIP. Upon successful connection with

DoorBird unit, the driver will register the DoorBird with the Control4 sip server, set the username

and password, and then test for proper communication back from the sip server. Once the sip

settings are sent to the DoorBird, the driver's work is finished. Communication between

DoorBird and Control4 sip server are handled outside of the driver's sandbox and control.

Proper functionality between Touchscreens and Intercom Anywhere should be tested and

Driver Setup