DoorBird D1101V 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} DoorBird D1101V에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorBird D1101V 7 페이지. Doorstation driver

verified before changing settings in the driver.

Advanced Settings Some projects require greater control of the sip server or are not using

Control4 as the sip server. For these projects, the dealer will need to program the sip Domain,

Username, and Password for their particular setup. This is done via the Intercom - Sip Driver

Property. Set this property to Manual and set the corresponding values (Domain, Username

and Password). This is not needed for most installations.

UI Proxy:

The DoorBird driver comes with an icon for customers to trigger the gate/lock connected to the

DoorBird or other custom actions the dealer wishes (Example: use the Control4 Navigator Agent

to show the DoorBird camera directly via Control4 touch screens). The actions associated with

single/double tapping the icon are set via the property UIButton: Single/Double Tap. Options are

Trigger Relay 1 (default), Trigger Relay 2, Silence Alerts, Display Status, and Nothing. Note:

Composer Events for single and double tap will still occur regardless of this setting.

Status and Silence Alerts are special actions that do the following:

Display Status: This feature will send a general information message about the current

status and driver event history to Control4 touchscreens. The information is the same

as Display Status under the Driver Actions drop down.

Silence Alerts: This feature will turn off (silence) alerts notifications programmed in the

driver.

Normal: Driver is working

Motion Detected

Doorbell has been pressed

Relay has been triggered

Silenced.

announcements in home are silenced. Notification on DoorBird

App will still be enabled

When this state is active, Doorbell and Motion

Display