astra telematics AT210 사용자 설명서 - 페이지 3

{카테고리_이름} astra telematics AT210에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. astra telematics AT210 9 페이지. Vehicle tracking device
astra telematics AT210에 대해서도 마찬가지입니다: 설치 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (4 페이지)

astra telematics AT210 사용자 설명서

Product Overview

The AT210 is simple vehicle tracking device, housed in a sturdy plastic enclosure, sealed
to IP67 specifications and designed for plant & machinery applications. Both GNSS and
GSM antennas are internal, with the option to use an external GNSS antenna when the
device cannot be mounted in a location with good sky visibility. The AT210 incorporates
the very latest technology, including a Cortex M3 ARM processor, Quectel M66 Quad
Band GSM/GPRS modem and ublox EVA-M8M GNSS with support for GPS, GLONASS,
GALILEO and Beidou. The AT210 operates from an external DC voltage source and has
a 510mAh internal back-up battery, which allows operation for approx. 5 hours in
continuous mode. Interconnections are made with a single 9-way DSUB connector
which provides IP67 sealing when mated.
Features
The main features of the AT210 are highlighted below:
Compact size (approximately cigarette box dimensions)
IP67 sealing
Cortex M3 ARM Processor
ublox EVA-M8M GNSS
Quectel M66 QUAD band GSM/GPRS/Bluetooth modem
Internal GSM antenna, ceramic PIFA type
Internal GNSS antenna, 25mm ceramic patch (optional external antenna)
Low power consumption (near zero current drain when vehicle ignition is off)
3 axis accelerometer (2/8g)
2 digital inputs
2 digital outputs
RS232 Port
Internal back-up battery, lithium, 450mAh
Configuration by RS232, SMS or TCP/UDP
Fast and reliable over the air firmware update
Modular communications protocol X
TCP or UDP mode
Non-volatile storage for 2000 reports
Pass through data mode
SDK available for rapid development of client customised applications
Approved to: CE, 2004/104/EC