astra telematics AT210 빠른 시작 매뉴얼

{카테고리_이름} astra telematics AT210에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. astra telematics AT210 4 페이지. Vehicle tracking device
astra telematics AT210에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 설치 매뉴얼 (5 페이지)

페이지 인쇄

AT210 Quick Start Guide

1. An ASCII terminal is useful for initial testing and configuration. If you already

have one, skip to step 2, otherwise :

a. We recommend Tera Term, which can be downloaded free of charge from:

http://logmett.com/index.php?/download/tera-term-467.html

b. Once downloaded, install Tera Term and start up a session

c. Select Setup and then choose Serial Port from the drop down options

d. Configure your serial connection as follows:

Choose the Port to suit your available COM ports on your PC. This will usually be

COM1 if you have a built in RS232 port. If using a USB-RS232 adapter, go to the

Windows® Device Manager and check which COM port has been assigned to your USB

adapter (note: the assigned COM port will change if you plug into a different USB

socket on your PC).

Select Setup and then Save Setup from the drop down menu list to save this

configuration

Leave the Tera Term window open whilst you now set up and connect the AT210

2. Check that the battery is fitted and connected:

a. Each AT210 is supplied with a 510mAh back-up battery, which should be fixed to the

PCB and connected as shown below:

b. Do not attempt to remove the battery from the cover, once it has been stuck down,

as prising or bending can cause fire and smoke.