astra telematics AT211 빠른 시작 매뉴얼

{카테고리_이름} astra telematics AT211에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. astra telematics AT211 5 페이지.

AT211 Quick Start Guide

1. Install an ASCII Terminal Application (on your PC)

An ASCII terminal is useful for initial testing and configuration. If you already have

one, skip to step 2.

a. We recommend TeraTerm, which can be downloaded from our server, here:

https://astratelematics-

my.sharepoint.com/:f:/p/phil/EiffxOSnjX1DiimDbvB5EHkBdk_nkauL34TKMLzLp4v4Sg?

e=d3Iilo

b. Once downloaded, install TeraTerm and open the application

c. Select RS232 session type

d. Select Setup and then choose Serial Port from the drop-down options

e. Configure your serial connection as follows:

Choose the Port to suit your available COM ports on your PC. This will usually be

COM1 if you have a built in RS232 port. If using a USB-RS232 adapter, go to the

Windows® Device Manager and check which COM port has been assigned to your USB

adapter (note: the assigned COM port will change if you plug into a different USB

socket on your PC).

Select Setup and then Save Setup from the drop-down menu list to save this

configuration

Leave the TeraTerm window open whilst you now set up and connect the AT211