DoorHan FAST-750 설치 및 운영 매뉴얼 - 페이지 7
{카테고리_이름} DoorHan FAST-750에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan FAST-750 18 페이지.
DoorHan FAST-750에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (16 페이지)
페이지 인쇄
NON-STANDARD INSTALLATION
1.
When doing a non-standard installation of the operator (at an angle of 90°). the microswitch.must be moved to a special
place. To do this:
a)
Disconnect the bottom cover of the housing and disconnect the microswitch contact of the board.
b) Disconnect the microswitch of the top housing cover.
c)
Squeeze in the new microswitch location the plug out of the hole and pull through it the microswitch contact and connect
it to the board.
d) Secure the microswitch (1) on the top housing cover with the help of self-drilling screws.
e) Mount the body of the operator.
2.
Install the splined bushing (3) on the motor shaft (2).
3.
Insert the motor (2) in the guide hole (4).
4.
Secure the motor by means of U-brackets (5) and self-drilling screws (6).
1.
Microswitch
2.
Motor shaft
3.
Splined bushing
4.
Guide
5.
U-bracket
6 x 15 self-drilling screws
6.
6
5
4
3
2
1
OPERATOR INSTALLATION
7