DoorHan SHAFT-120 설치 및 운영 매뉴얼 - 페이지 3

{카테고리_이름} DoorHan SHAFT-120에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SHAFT-120 12 페이지.
DoorHan SHAFT-120에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지)

페이지 인쇄

1.2. TECHNICAL SPECIFICATIONS

Shaft hole (with key way)

Manual chain length

Weight with chain

Thermal protection

Operating temperature range

1.3. OPERATOR PACKAGE

Upon receiving the operator, unpack it and inspect visually. Make sure, that the operator is not damaged. If any damages are

found, please contact your supplier.

The operator components included in the standard package are listed in the following table.

№

2. SAFETY INSTRUCTIONS

WARNING! IMPORTANT SAFETY INSTRUCTIONS! It is important for the safety of persons to follow safety instructions.

Save these instructions.

Follow all instructions since incorrect installation can lead to severe injury.



Shaft-120 was designed for automation of industrial sectional doors. Do not use the operator for other than intended



purposes.

DoorHan shall not be held responsible in case of injury caused by misuse of the product.



Prior to installation make sure that the door is properly balanced and moves smoothly.



Installation must be performed in accordance with the standards EN12453 and EN 12445. For countries, which are not



EC members, these requirements are to be met.

Check if the door conforms to the standards EN12604 and EN 12605 (see documentation accompanying the door). For



countries, which are not EC members, the above mentioned requirements shall be met in order to obtain an appropriate

safety level.

Mechanical units of the door shall conform to the standards EN12604 and EN 12605.



Prior to installation, check that the location of operator installation is suitable by its climatic conditions to technical



specifications of the operator.

Parameters

Power supply

Torque

Motor speed

Shaft speed

Dimensions

Intensity

Oil amount

Engine power

Protection rating

Name

Operator

Bracket

Set of fastenings

Manual operator chain (12 m)

External button switch

Manual

SAFETY INSTRUCTIONS

Characteristics

380 V/50 Hz

120 N·m

1 400 rpm

25.4 mm

12 m

22 rpm

24 kg

430 × 290 × 120 mm

120°C

65%

0.25 l

700 W

IP44

–40...+55°C

Quantity