DoorHan SHAFT-120 설치 및 운영 매뉴얼 - 페이지 5
{카테고리_이름} DoorHan SHAFT-120에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SHAFT-120 12 페이지.
DoorHan SHAFT-120에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지)
페이지 인쇄3. OPERATOR UNIT
110
120
4. OPERATOR INSTALLATION
4.1. TOOLS
1
2
1.
Set of spanners
2.
Set of slotted and cross screwdrivers
3.
Set of drills for metal
Before installation make sure that the door is in good working condition and the torsion springs balance its leaf. Install the
operator as described below (see par. 4.2 or 4.3).
4.2. ON-SHAFT INSTALLATION
Install mounting bracket on the wall using screws. The mounting bracket can be installed from the left or from the right
of the operator.
Turn the release lever 180 degrees counterclockwise.
Install the first closing ring on the door shaft.
120
1.
Release cord
2.
Manual chain
3.
Reducer housing
4.
Limit switches
3
4
4.
Set of drills for concrete
5.
Pliers
6.
Hacksaw for metal
430
5.
Motor
6.
Control unit
7.
Manual drive unit
5
6
7.
Electric drill
8.
Tape measure (folding rule)
OPERATOR UNIT
7
8
5