DoorHan SHAFT-120 Instrukcja instalacji i obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Otwieracz do bram DoorHan SHAFT-120. DoorHan SHAFT-120 12 stron.
Również dla DoorHan SHAFT-120: Instrukcja instalacji i obsługi (12 strony)

Drukuj stronę

3. OPERATOR UNIT

110
120

4. OPERATOR INSTALLATION

4.1. TOOLS

1
2
1.
Set of spanners
2.
Set of slotted and cross screwdrivers
3.
Set of drills for metal
Before installation make sure that the door is in good working condition and the torsion springs balance its leaf. Install the
operator as described below (see par. 4.2 or 4.3).

4.2. ON-SHAFT INSTALLATION

Install mounting bracket on the wall using screws. The mounting bracket can be installed from the left or from the right
of the operator.
Turn the release lever 180 degrees counterclockwise.
Install the first closing ring on the door shaft.
120
1.
Release cord
2.
Manual chain
3.
Reducer housing
4.
Limit switches
3
4
4.
Set of drills for concrete
5.
Pliers
6.
Hacksaw for metal
430
5.
Motor
6.
Control unit
7.
Manual drive unit
5
6
7.
Electric drill
8.
Tape measure (folding rule)
OPERATOR UNIT
7
8
5