DoorHan SWING-5000 설치 및 운영 매뉴얼 - 페이지 10
{카테고리_이름} DoorHan SWING-5000에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SWING-5000 16 페이지.
페이지 인쇄
6. extreme posItIons adJustment
6.1. preparatIon
cover
1. unscrew 2 tapping screws and remove the cover.
nut m8
3. Install the front and back brackets on the operator.
6.2. open posItIon
1. release the operator and put the gate leaf in fully
open posi tion.
2. unscrew fastening of the opening limit switch.
3. move the limit switch along the guide, until the
microswitch contacts with the slide.
4. fix the microswitch.
6.3. Closed posItIon
1. put the gate leaf in fully closed position, which can
be determined by the mechanical stop.
2. unscrew fastening of the closing microswitch.
3. move the end microswitch along the guide until the
microswitch contacts with the slide.
4. move the microswitch ahead until the microswitch
finger leaves response area.
5. fix the microswitch.
WarnInG! When the end positions are adjusted, make sure, that the limit switches work correctly: after pressing the
microswitch the gate movement should be stopped.
10
2. unscrew 2 tapping screws and remove the lead screw casing.
lead screw
extreme posItIons aDjustment
screw casing