DoorHan SWING-5000 Kurulum ve Kullanım Kılavuzu - Sayfa 10
Kapı Açıcı DoorHan SWING-5000 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. DoorHan SWING-5000 16 sayfaları.
Sayfayı Yazdır
6. extreme posItIons adJustment
6.1. preparatIon
cover
1. unscrew 2 tapping screws and remove the cover.
nut m8
3. Install the front and back brackets on the operator.
6.2. open posItIon
1. release the operator and put the gate leaf in fully
open posi tion.
2. unscrew fastening of the opening limit switch.
3. move the limit switch along the guide, until the
microswitch contacts with the slide.
4. fix the microswitch.
6.3. Closed posItIon
1. put the gate leaf in fully closed position, which can
be determined by the mechanical stop.
2. unscrew fastening of the closing microswitch.
3. move the end microswitch along the guide until the
microswitch contacts with the slide.
4. move the microswitch ahead until the microswitch
finger leaves response area.
5. fix the microswitch.
WarnInG! When the end positions are adjusted, make sure, that the limit switches work correctly: after pressing the
microswitch the gate movement should be stopped.
10
2. unscrew 2 tapping screws and remove the lead screw casing.
lead screw
extreme posItIons aDjustment
screw casing