Canon PIXMA MP150 서비스 매뉴얼 - 페이지 16

{카테고리_이름} Canon PIXMA MP150에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP150 26 페이지. Recycled cartridge
Canon PIXMA MP150에 대해서도 마찬가지입니다: 설정 지침 (2 페이지), 보충 설명서 (6 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (4 페이지), 설치/문제 해결 매뉴얼 (6 페이지)

페이지 인쇄

6. TROUBLESHOOTING FLOWCHART

6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment)

Power ON

Service Call

Error?

Open access cover,

and install print head

Service Call

Error?

Connect to computer

Shipment inspection

pattern printing

Correct?

Yes

Main waste ink counter

less than 7%?

Yes

Normal

At end of refurbishment, set the printer to the default shipment conditions (with the paper lifting plate in the raised

position, and the carriage locked in the home position), following the steps below.

Install the ink cartridges, and while pressing and holding the Power button, connect the AC plug. After the

Power LED lights in green, with the Power button still pressed, press the Resume/Cancel button 2 times,

and release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed,

the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

Print the shipment inspection pattern, and reset the EEPROM, following the procedures in 4. SERVICE

MODE.

Press the Power button to turn off the printer. (The paper lifting plate is raised, and the carriage moves to

the print head replacement position.) Remove the ink cartridges. (DO NOT print after this point.)

Yes

See 4. SERVICE MODE for

printing method.

Replace print head and print

shipment inspection pattern

Correct?

Yes

Visually check the platen waste ink

absorber, and replace it if it is

soiled.

< Shipment inspection pattern check items>

(See APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.)

1. Non-ejection of ink: Yes

2. Top of form:

3. Vertical lines:

4. Gray area:

Defective

(15/24)

Off the paper

Not connected

White lines / uneven density NG