DoorHan PCB-SW 24 프로그래밍 지침 매뉴얼 - 페이지 19
{카테고리_이름} DoorHan PCB-SW 24에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan PCB-SW 24 20 페이지.
페이지 인쇄
4.4. REMOTE PROGRAMMING OF REMOTE CONTROLS
Items 1–4 shall be performed within 5-second interval:
1. Press and hold the button 2 of the programmed remote control.
2. Without releasing the pressed button 2 press and hold the button 1.
3. Release the pressed buttons.
4. Press the programmed button, the receiver will enter the remote control programming menu.
5. On the remote control press and release the button that you would like to program twice. A short signal will sound,
confirming successful recording, the display will show the number of recorded remote controls (01, for example).
1
4
3
3
2
NOTE.
Perform remote control programming within operating range of the receiver.
The number of each button can be determined by the dots on the remote control body.
1
1
4
2
2
REMOTE CONTROL PROGRAMMING
1
2
19