Canon PIXMA MP460 서비스 참조 매뉴얼 - 페이지 4
{카테고리_이름} Canon PIXMA MP460에 대한 서비스 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP460 10 페이지. Canon pixma mp460 quick setup (spanish)
Canon PIXMA MP460에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 보충 설명서 (1 페이지), 브로셔 (2 페이지), 보충 설명서 (6 페이지), 매뉴얼 (4 페이지), 여기에서 시작 (2 페이지), (설치 지침 (2 페이지)
페이지 인쇄
<Ink absorber counter resetting procedures>
1) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of
time(s) according to the ink absorber whose counter should be reset to 0%.
Time(s)
LED indication
0 times
Green
(ON/OFF)
1 time
Orange (Alarm)
2 times
Green
(ON/OFF)
<Ink absorber counter value setting procedures>
1)
In the ink absorber counter value setting mode, press the Stop/Reset button the specified number
of time(s) according to the ink absorber whose value should be transferred to the EEPROM.
Time(s)
LED indication
0 times
Green
(ON/OFF)
1 time
Orange (Alarm)
2 times
Green
(ON/OFF)
3 times
Orange (Alarm)
or more
2)
Press the ON/OFF button to proceed to the next step.
3) The ink absorber counter value can be set in 10% increments by pressing the Stop/Reset button.
Press the Stop/Reset button the appropriate number of time(s) to select the value which is
closest to the actual ink amount in the ink absorber.
Time(s)
0 times
0%
1 time
10%
2 times
20%
3 times
30%
4 times
40%
5 times
50%
6 times
60%
7 times
70%
8 times
80%
9 times
90%
10 times
Not valid.
or more
Press the ON/OFF button to return to the ink absorber counter value setting mode.
4)
Press the ON/OFF button to set the selected value to the EEPROM
3-4. Verification Items
(1) Service test print
<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below. (The
information is given in the upper portion of the printout.)
MPxxx M=Vxxx D=xxx.x USB(xxxxxx)
JPN JPN JPN JPN JPN JPN JPN
JPN JPN JPN JPN JPN JPN JPN
MPxxx:
Model name
M=Vxxx:
ROM version
D=xxx.x:
Ink amount in the main ink absorber (%)
Ink absorber
Main ink absorber
Platen ink absorber
Both the main and platen ink absorbers
Ink absorber
Main ink absorber
Platen ink absorber
Both the main and platen ink absorbers
Return to the ink absorber counter value setting mode
Ink absorber counter value to be set (%)
(4/4)