Canon PIXMA MP610 Series 서비스 매뉴얼 - 페이지 34
{카테고리_이름} Canon PIXMA MP610 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP610 Series 45 페이지. All-in-one photo inkjet printer
Canon PIXMA MP610 Series에 대해서도 마찬가지입니다: 여기에서 시작 (2 페이지), 보충 설명서 (6 페이지), 브로셔 및 사양 (2 페이지), 빠른 시작 매뉴얼 (40 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
- 1. Table of Contents
- 1. 1 Maintenance
- 1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
- 1. Customer Maintenance
- 1. Special Tools
- 1. Serial Number Location
- 2. 2 List of Error Display / Indication
- 2. Operator Call Errors
- 2. Service Call Errors
- 2. Other Error Messages
- 2. Warnings
- 2. Troubleshooting by Symptom
- 3. 3 Repair
- 3. Notes on Service Part Replacement
- 3. Adjustment / Settings
- 3. Verification Items
3) In the printout, select the Pattern No. in which streaks or lines are the least noticeable.
3-1) LF correction value
Press the Stop/Reset button the same number of time(s) as the selected Pattern No., then press the ON/OFF button.
Selected pattern
number
1
0
2
- Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and
Power in green.
- If the Stop/Reset button is pressed 3 times or more, then the ON/OFF button is pressed, the machine returns to
the service mode menu selection.
3-2) Eject correction value
Press the Stop/Reset button the same number of time(s) as the selected Pattern No., then press the ON/OFF button.
Selected pattern
number
1
0
2
- Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and
Power in green.
- If the Stop/Reset button is pressed 3 times or more, then the ON/OFF button is pressed, the machine returns to
the service mode menu selection.
4) The selected LF correction value or Eject correction value is written to the EEPROM, and the flag for the E-MIP correction value
becomes OFF, enabling the LF / Eject correction values written to the EEPROM. Then, the flag for the fixed value of the endurance
correction becomes ON, and the machine returns to the service mode menu selection.
Number of times the Stop/Reset button is
pressed (M)
1 time
0 times
2 times
Number of times the Stop/Reset button is
pressed (N)
1 time
0 times
2 times
32 / 43