Canon PIXMA MP640 네트워크 설정 매뉴얼 - 페이지 10
{카테고리_이름} Canon PIXMA MP640에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP640 16 페이지. Installing your multifunction
on additional computers
Canon PIXMA MP640에 대해서도 마찬가지입니다: 부품 카탈로그 (7 페이지), 네트워크 매뉴얼 (24 페이지), 네트워크 매뉴얼 (19 페이지), 네트워크 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (8 페이지)
페이지 인쇄
8-A
WEP
1
Select the network key format.
•
Select Characters when the network key is 5 or 13
characters.
Select Hexadecimal when it is 10 or 26 characters
(digits).
2
Select the WEP key number you want to use,
then press the OK button.
•
When using AirPort, select WEP key 1 in the
screen. Selecting other key numbers will disable the
connection between the machine and AirPort.
3
Enter the network key, then press the OK button.
•
Enter upper and lower case letters of the alphabet
correctly when the key input format is characters.
Letters are case sensitive.
Letters are not case sensitive if the format is
hexadecimal.
4
Make sure that the network key is correct, then
press the OK button.
8-B
WPA/WPA2
Disable
9
When the completion screen appears, press the OK
button.
The Settings screen returns.
WPA/WPA2
1
Select the network key format.
•
Select Characters when the network key is between
8 and 63 characters.
Select Hexadecimal when it is 64 characters (digits).
2
Enter the network key, then press the OK button.
•
Enter upper and lower case letters of the alphabet
correctly when the key input format is characters.
Letters are case sensitive.
Letters are not case sensitive if the format is
hexadecimal.
3
Make sure that the network key is correct, then
press the OK button.
Disable