Canon PIXMA MP640 네트워크 설정 매뉴얼 - 페이지 12
{카테고리_이름} Canon PIXMA MP640에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP640 16 페이지. Installing your multifunction
on additional computers
Canon PIXMA MP640에 대해서도 마찬가지입니다: 부품 카탈로그 (7 페이지), 네트워크 매뉴얼 (24 페이지), 네트워크 매뉴얼 (19 페이지), 네트워크 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (8 페이지)
페이지 인쇄
Restoring the Machine's Default LAN Settings to Perform Setup Again
Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Easy-Scroll Wheel to select Settings, then
press the OK button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
0
5
Select Yes, then press the OK button.
6
Make sure that the screen shown to the right appears.
•
After a while, the LAN settings screen returns.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures in "Wireless Setup" on page 22 and onward or
"Wired Setup" on page 29 and onward in the printed manual: Getting Started.
<Default State>
Wireless connection
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically
Wired connection
Inactive
TCP/IP setting
Obtain an IP address automatically