Canon PIXMA MP810 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Canon PIXMA MP810에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP810 20 페이지. Personal printing guide
Canon PIXMA MP810에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 빠른 시작 (1 페이지), 보충 설명서 (6 페이지), 빠른 시작 매뉴얼 (38 페이지)

페이지 인쇄

*1: General notes:

- Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly.

See

3-2. Special Notes on Repair Servicing

- Do not drop the ferrite core, which may cause damage.

- Protect electrical parts from damage due to static electricity.

- Before removing a unit, after removing the power cord, allow the machine to sit for approx. 1 minute (for capacitor discharging to protect

the logic board ass'y from damages).

- Do not touch the timing slit strip film, timing slit disk film, and timing slit disk eject film. No grease or abrasion is allowed.

- Protect the units from soiled with ink.

- Protect the housing from scratches.

- For the MP810 automatic print head alignment, use Matte Photo Paper (MP-101) to ensure alignment accuracy.

- Exercise caution with the screws, as follows:

i. The screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit (DO NOT loosen them in other

cases).

ii. DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning (they are not adjustable in

servicing)

or the Parts Catalog for details.

1-12